Lan Interface Setup; Wan Interface Setup - Sapido GR-1102 User Manual

4.2.2

LAN Interface Setup

If you are using N+ 3.5G Mini Server Router with multiple PCs on your LAN, you must
connect the LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a
unique IP address to each device residing on your LAN. The LAN IP address identifies
the router as a node on your network; that is, its IP address must be in the same subnet
as the PCs on your LAN. The default LAN IP for the Internet Security Router is
192.168.1.1.
For Gateway IP Address, the IP address 192.168.1.xxx (xxx can be any number between
1 and 254 that is not used by another device.) Please don't change the default LAN IP
settings at this section until you have completed the rest of the configurations and confirm
that your Internet connection is working.
Click on Next button to proceed.
4.2.3

WAN Interface Setup

The WAN settings can be referred to as the Public setting. All IP information in the WAN
settings is public IP addresses which are accessible on the Internet. N+ 3.5G Mini Server
Router supports 3 interfaces and 4 access types to WAN. Select one of the WAN
connection modes required by your ISP in the following WAN Setup Configuration page,
the WAN setup pages will vary depending on what kind of WAN Type you select.
http://www.sapido.com.tw 32 User's Manual V1.0