Table of Contents
Advertisement
(15.) Enable: check it for enable or not.
(16.) Band: select the frequency from the drop down list.
(17.) SSID: please enter the class SSID for this .
(18.) Data Rate: please select the data transmission rate.
(19.) Access: defined the access type.
a. LAN+WAN: the client can access to the Internet and connect to 3.5G server
router's GUI to setup.
b. WAN: the client can only access to the Internet.
(20.) Active Client List: display the properties of the client which is connecting
successfully.
(21.) Apply Changes: Please click Apply Changes to initiate or click Reset to
cancel.
Network Type： ： ： ：
4.
Please select "Infrastructure" or "Ad hoc." The default is "Infrastructure." The selection
is disabled when wireless mode is selected to AP.
SSID： ： ： ：
5.
Please input your wireless network name. Default is "SAPIDO_Mobile_Hotspot".
6.
Channel Width
Please select "20MHZ" or "40MHZ" channel width to change the transmission channels.
http://www.sapido.com.tw
212
User's Manual V1.0
Hide quick links:
Advertisement
Table of Contents
