Sapido GR-1102 User Manual page 76

1. Host Name
The host name is optional; but if your ISP requires you to input a specific host name,
please put it in, for example, N+ 3.5G Mini Server Router applied from ISP. Generally,
Cable Modem will provide the hostname information.
2. MTU Size
MTU stands for Maximum Transmission Unit. For Static IP connection, the default MTU
should be provided by computer operating systems (OS). Advanced users can set the
MTU manually for increasing the internet performance. The largest number is 1492 byte
3. DNS
If ISP provides you DNS information, please select Attain DNS automatically, otherwise
select Set DNS Manually and input the DNS information into the blank.
4. 3.5G Backup
The default interval between the two connection detection is 3 minutes, and the range is
from 1 to 60 minutes. Once Internet connection is disconnected, the system automatically
connects Internet via 3.5G adapter. If 3.5G signal is not available, it starts to search
downward for 3/2.75/2.5G signals until none existed. User needs manual switch through
the GUI setting page to recover the original connection.
5. Clone MAC Address
Copy the MAC address from the device you had registered to your ISP if your ISP asks
for the specific MAC Address.
6. Enable IGMP Proxy
The Internet Group Management Protocol (IGMP) is a communication protocol used to
manage the membership of Internet Protocol multicast groups. IGMP is used by IP hosts
and adjacent multicast routers to establish multicast group memberships. You can
choose to enable IGMP Proxy to provide service.
7. Enable Ping Access on WAN
Select Enable Ping Access on WAN, will make WAN IP address response to any ping
request from Internet users. It is a common way for hacker to ping public WAN IP address,
to see is there any WAN IP address available.
8. Enable Web Server Access on WAN
This option is to enable Web Server Access function on WAN.
http://www.sapido.com.tw 76 User's Manual V1.0