Sapido GR-1102 User Manual page 153

1. IP Address
The default value of LAN IP address is 192.168.1.254 for this router.
2. Subnet Mask
Input Subnet Mask, normally it is 255.255.255.0.
3. Default Gateway
Input ISP Default Gateway Address. If you don't know, please check with your ISP.
4. DHCP
Enable or disable DHCP services. The DHCP server will automatically allocate an
unused IP address from the IP address pool to the requesting computer if enabled.
5. DHCP Client Range
Define the DHCP client range and then the DHCP server will assign an IP to the
requesting computer from this range. The Show Client will display every assigned IP
address, MAC address, and expired time. The default range is 192.168.1.100 -
192.168.1.200.
6. 802.1d Spanning Tree
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network protocol that ensures
a loop-free topology for any bridged LAN. The main purpose of STP is to ensure that you
do not create loops when you have redundant paths in your network. Loops are deadly to
a network.
7. Clone MAC Address
Copy the MAC address from the device you had registered to your ISP if your ISP asks
for the specific MAC Address.
8. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset to clear all
the input data.
http://www.sapido.com.tw 153 User's Manual V1.0