Main Unit Installation; Anti-Tumble Measures - Hitachi UT42MX70U User Manual

Colour lcd monitor
Table of Contents

Advertisement

SAFETY PRECAUTIONS (continued)

Main Unit Installation

When installing the main unit, be sure to use the specifi ed mounting units in order to obtain maximum performance
and maintain safety.
We assume no responsibility nor liability for personal injuries or property damage caused by use of other mounting
units or improper installation.
With respect to installation of the Tabletop stand, be sure to use the supplied Tabletop stand TS70T32KE for
UT32MH70U/E, TS70T37KE for UT37MX70U/E or TS70T42KE for UT42MX70U/E. Please read User's manual
for the Tabletop stand very carefully before installation.
*The Tabletop stand is attached to the monitor in pictures in this User's manual.
If using Wall or Ceiling Mounting units, contact your local dealer and ask for an approved installation specialist to
set up the unit. Never attempt to install it yourself. That could cause injury or damage.
Please make sure that there is adequate space around
the unit to prevent overheating.
Make sure not to block any ventilation holes.
Do not install the unit in a small space such as inside a
cabinet, closet or box.
Leave at least 10cm of clearance from each side of the
unit and 30cm from the top of the unit to ceiling.

Anti-tumble Measures

Install in a stable location and take safety precautions against to ensure that the monitor does not fall.
Securing to a table
Fasten the fastening strap to a table using the wood screw provided.*
Wood screw
(4 x 20 screw) : 1 pc.
Securing to ceiling or wall
Use the specifi ed mounting unit to secure the set to a ceiling or wall.
NOTE
For more information regarding mounting of the unit, please contact your dealer.
Please install the unit in a proper location where it does not expose anyone to the danger of bumping themselves
(for example their hands, head or face, etc) against the edges of the unit and causing personal injury.
10cm
or more
Please secure to a table after installing the Tabletop stand.
*The fastening strap and the wood screw are packed with the
Tabletop stand.
NOTE
Attach the fastening strap to the Tabletop stand before installing
the Tabletop stand to the monitor.
See User's manual for the Tabletop stand about the procedure for
attaching.
10cm
or more
30cm
or more
10cm
or more
10cm
or more
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ut32mh70uUt37mx70uUt32mh70eUt37mx70eUt42mx70e

Table of Contents