Dip-Switch Setup - Waters Network Systems PSL1008-MSC Operating Manual

4.1

DIP-Switch Setup

The DIP-switch is used to configure the modes for VLAN and duplex modes. DIP
switch settings are described in the following table.
No. Function
1 VLAN
2 Fiber Port Full/Half Duplex
Waters Network Systems
Description
ON: Enable the VLAN function on each port
OFF: Disable the VLAN function on each port
HDX: Half Duplex
FDX: Full Duplex
Table 4-1
DIP-switch
Figure 4-1 DIP Switch
User's Manual
PSX/ES1008 Models
LEDs
Page 10