Stop Follow Or Stop Goto; Changing The Display Mode - Raymarine RC435i Owner's Handbook Manual

72

Stop Follow or Stop GoTo

➤
To stop following the route or target point:
1. Either press the GOTO key or move the cursor over the target waypoint.
2. Select the STOP GOTO or STOP FOLLOW function:
The dotted line from the vessel to the target waypoint disappears.

5.5 Changing the Display Mode

Use the PAGE key to select the desired display mode. Repeat presses of
the PAGE key provide the following display modes:
•
•
•
•
•
•
•
Note: Press the GOTO key in any display mode to return to normal Chart
display.
➤
To change the display mode:
1. Press the PAGE key to show the SET UP functions with SYSTEM SET UP
2. Repeat Step 1 to cycle through each of the available display modes.
Note: The Set Up Function Bar remains displayed in each display mode.
To remove the Set Up Function Bar, press CLEAR.
STOP RESTART
GOTO
STOP RESTART
FOLLOW
Set Up functions (see Chapter 4)
Course Deviation Indicator (CDI)
Bearing & Distance Indication (BDI)
Waypoint data
Navigation data
Time/Date data
Return to Chart display
highlighted:
SYSTEM
SETUP
XTE
WAYPOINT
XTE ADVANCE
CHART TRACK
SETUP SETUP
RC435 and RC435i Chartplotters
D4689 1
D4688_1
GPS
SETUP
D4699_1