Midi Receive Channel; Midi Out / Midi Thru - Musicom Lab EFX MkIII+ User Manual

Note
* The ---. means no Control Change is transmitted.
* The last decimal point on the display means that the display shows a Program Change number or controller
number.
* For initial default Control Change channels and controller numbers setting, refer to page 14.
* Connect an expression pedal or an external foot switch to the XPDL jack before turing on the EFX MkIII+
Audio Controller.

3.3.4 MIDI Receive Channel

The EFX MkIII+ can receive the MIDI Program Change and Control Change Message.
The MIDI channel can be set to any individual channel from 1 to through 16, or reception can be turned off.
①
If you are already in the Edit Mode, press/hold the
edit the MIDI receive channel until the r.ch is shown on the display.
②
Press the PS-2 switch(CH, channel) to set a MIDI receive channel. The display will show the current MIDI
receive channel.
③
Press/hold the BANK UP or BANK DOWN switches to select a channel from 1
through 16 or C.--. The LED above the PS-2 switch will flash.
④
Press the PS-2 switch to store a new channel in memory. The display will show str (store) for a moment
and the LED above the PS-2 switch will stop flashing.
Note
* The c.--. means reception can be turned off.
* The initial default setting is C.01.
* For receiving the Program number refer to page 14.
* Receiving Controller Number is the same as Transmitting Controller Number.
3.3.5 MIDI OUT / THRU
The MIDI OUT connector of the EFX MkIII+ functions as a MIDI OUT or MIDI THRU.
When MIDI OUT operation is selected, MIDI data in the EFX MkIII+ are transmtted via the MIDI OUT
connector. And all Program Change and Control Change on the receive MIDI channel are not retransmitted.
When MIDI THRU operation is selected, received MIDI data via the MIDI IN connector is retransmitted via the
MIDI OUT connector. In this case, MIDI data in the EFX MkIII+ are not transmitted.
①
if you are already in the Edit Mode, press/hold the
function select) until the M.ou or M.th is shown on the display.
②
Press the BANK UP switch to select MIDI OUT or MIDI THRU.
It will automatically be stored in memory when you return to Preset Mode.
Note
* The M.ou and M.th mean MIDI OUT and MIDI THRU.
* The initial default setting is M.th.
EFX MkIII+ Audio Controller User Manual
FS-1 switch(FS, function select) to
FS-1 switch(FS,
11