Musicom Lab EFX MkIII+ User Manual page 10

④
Press the PS-2 switch to store a new channel in memory. The display will show str (store) for a moment
and the LED above the PS-2 switch will stop flashing.
⑤
Press the PS-3 switch(NUM, number) to set an EPL or ESW controller number. The
display will show the current EPL or ESW controller number.
⑥
Press/hold the BANK UP or BANK DOWN switches to select an EPL or ESW controller number from 000.
through 127. or ---.. The LED above the PS-3 switch will flash.
⑦
Press the PS-3 switch to store a new EPL or ESW controller number in memory.
The display will show str (store) for a moment and the LED above the PS-3 switch will stop flashing.
⑧
The EFX MkIII+ has an additional reverse function that reverses the control value.
Press the PS-4 switch(TGL, toggle) to reverse an EPL or ESW
control value. The display will show the current EPL or ESW
control value mode.
The table below shows the control value of the normal and reverse modes.
Minimum Position
⋮
Maximum Position
⑨
Press the BANK UP switch to toggle between normal and reverse. The LED above the PS-4 switch will
flash.
⑩
Press the PS-4 switch to store the reverse function in memory. The display will show str(store) for a
moment and the LED above the PS-4 switch will stop flashing.
Cable Wiring for Expression Pedal
The cable required is a stereo (TRS) to two mono 1/4" phone plugs. Connect the tip(stereo plug) to the pedal
input, ring to the pedal output and sleeve to ground on all 3 plugs.
Cable Wiring for External Foot Switch
The cable required is a mono (TS) to a mono(TS) 1/4" phone plugs.
EFX MkIII+ Audio Controller User Manual
Expression Pedal (EPL)
Normal Reverse
0 (0x00) 127 (0x7F)
⋮ ⋮
127 (0x7F) 0 (0x00)
External Foot switch (ESW)
Normal
Open 0 (0x00)
Closed 127 (0x7F)
Reverse
127 (0x7F)
0 (0x00)
10