Link; Popping Noise Reduction Control - Musicom Lab EFX MkIII+ User Manual

3.3.6 LINK

Two EFX MkIII+'s can be setup to operate in a Master/Salve manner, allowing two EFX MkIII+'s to control the
same rig from remote on-stage and off-stage locations. All MIDI and loop combination data in the slave EFX
MkIII+ is ignored.
In the Link data send/receive functions, you can copy all data from the Master EFX MkIII+ to the slave unit.
Link Master/Slave Mode
①
If you are already in the Edit Mode, press/hold
the FS-1 switch(FS, function select) to select the
master/slave mode until the L.oF, L.MA or LSL
is shown on the display.
②
Press the BANK UP switch to select L.oF, L.MA or L.SL.
It will automatically be stored in memory when you return to Preset Mode.
Note
* The L.oF, L.MA and L.SL mean Link OFF, Link Master and Link Slave.
* The initial default setting is L.oF.
Link DATA Send/Receive
①
If you are already in the Edit Mode, press/hold the
until the L.oF, L.MA or LSL is shown on the display.
②
Press the BANK UP switch of the slave EFX MkIII+ to receive the data from master
unit until the L.dr is shown on the display.
③
if you are already in the Edit Mode, press/hold the
until the L.oF, L.MA or LSL is shown on the display.
④
Press the BANK UP switch of the master EFX MkIII+ to send the data to slave unit
until the L.dS is shown on the display. The LED above the PS-4 switch will flash.
⑤
Press the FS-4 switch of the master EFXIII+, The data from the master EFX MKIII+ will be transmitted to
the slave unit. During the data sending/receiving, the display will flash. When the data sending/receiving is
successful, the display will stop flashing.
Note
* The L.dS and L.dr mean Link DATA Send and Receive.

3.3.7 Popping Noise Reduction Control

The EFX MkIII+ Audio Controller is based on relay switching. This method is utilized to route the audio signal
with absolutely no tone coloration or degradation. The disadvantage of relays is that they can produce a slight
popping noise when they switch on/off. The 5-stage popping noise reduction control is excellent for reducing
this popping noise by muting time control of audio signal and switching order when the relays switch on/off.
* The popping noise reduction control is global (the same for all banks/presets). You don't need to edit this
for any other banks/presets if you have already done so.
EFX MkIII+ Audio Controller User Manual
FS-1 switch(FS, function select) of the slave EFXIII+
FS-1 switch(FS, function select) of the master EFXIII+
12