Ground Lift On/Off; Instant Access Mode - Musicom Lab EFX MkIII+ User Manual

3.1.2 Groung Lift On/Off
The 8 loops of the EFX MkIII+ Audio Controller make up 2 groups.
One is Group A from IN A to Out A, the other is Group B from IN B to OUT B.
The ground Lift switch is useful to prevent ground loop hum/noise when connecting a musical instrument to
OUT A and IN B jacks. Refer to page 15~18.
3.2 Instant Access Mode (Programming the Loops and Function Switches)
①
Select the preset to be programmed in the Preset Mode.
②
Press the MODE switch to enter the Instant Access Mode. The display will show:
And the 4 LEDs above the PS-1 ~ PS-4 switches will indicate the corresponding
Loop1 ~ Loop4 as on or off.
③
Press the PS-1 through PS-4 switches to turn the corresponding Loop1 ~ Loop4 on or
off. The corresponding LEDs will go on or off.
④
Press the MODE switch. The display will show:
And the 4 LEDs above the PS-1 ~ PS-4 switches will indicate the corresponding
Loop5 ~ Loop8 as on or off.
⑤
Press the PS-1 through PS-4 switches to turn the corresponding Loop5 ~ Loop8 on or
off. The corresponding LEDs will go on or off.
⑥
Press the MODE switch. The display will show:
And the 4 LEDs above the PS-1 ~ PS-4 switches will indicate the corresponding
Function Switch1 ~ Function Switch4 as on or off.
⑦
Press the PS-1 through PS-4 switches to turn the corresponding Function Switch 1 ~
Function Switch 4 on or off. The corresponding LEDs will go on or off.
⑧
Press the BANK UP switch to store the edit and return to Preset Mode. For the other side, press the
BANK DOWN switch to return to preset mode without storing the edit.
⑨
Follow the same procedure
switches.
EFX MkIII+ Audio Controller User Manual
① ⑧
~ for any other presets you want to program for the loops and function
6