Edit Mode; Midi Program Change - Musicom Lab EFX MkIII+ User Manual

Musicom efx mkiii+ audio controller user manual
Hide thumbs Also See for EFX MkIII+:
Table of Contents

Advertisement

3.3 Edit Mode

The Edit Mode contains the utility functions. To enter the Edit Mode, you must be in the
Preset Mode. Press/hold the MODE switch to enter the Edit Mode for 1 second. The
display will show:
Press/hold the PS-1 switch(FS, function select) to scroll through the utility functions.
Below is a list of functions in the order that they are shown.
Function Select Order List
PC.1
sets 1st MIDI Program Change
PC.2
sets 2nd MIDI Program Change
PC.3
sets 3rd MIDI Program Change
PC.4
sets 4th MIDI Program Change
PC.5
sets 5th MIDI Program Change
LP.1
sets 1st MIDI Control Change for the Loop1 On/Off
LP.2
sets 2nd MIDI Control Change for the Loop2 On/Off
LP.3
sets 3rd MIDI Control Change for the Loop3 On/Off
LP.4
sets 4th MIDI Control Change for the Loop4 On/Off
LP.5
sets 5th MIDI Control Change for the Loop5 On/Off
LP.6
sets 6th MIDI Control Change for the Loop6 On/Off
LP.7
sets 7th MIDI Control Change for the Loop7 On/Off
LP.8
sets 8th MIDI Control Change for the Loop8 On/Off
FS.1
sets 9th MIDI Control Change for the Function Switch1 On/Off
FS.2
sets 10th MIDI Control Change for the Function Switch2 On/Off
FS.3
sets 11th MIDI Control Change for the Function Switch3 On/Off
FS.4
sets 12th MIDI Control Change for the Function Switch4 On/Off
EPL / ESW
sets MIDI Control Change for the continuous control port XPDL
r.ch
sets MIDI receive channel of EFX MkIII+
M.ou / M.th
sets MIDI OUT or THRU
L.oF ~ L.dr
sets Master/Slave mode or Send/Receive EFX MkIII+ data
Pr.0 ~ Pr.4
sets 5-stage popping noise reduction control
PS.F / PS.n
sets MIDI SysEx for the VOODOO LAB Pedal Switcher

3.3.1 MIDI Program Change

Select the preset to be edited in the Preset Mode
Press/hold the
MODE switch to enter the Edit Mode for 1 second if you are in the
Preset Mode. The PC.1 will be automatically selected and the display will show:
Press the
PS-2 switch(CH, channel) to set a PC.1 channel number. The display will
show the current PC.1 channel.
Press/hold the
BANK UP or BANK DOWN switches to select a channel from 1
through 16. The LED above the PS-2 switch will flash.
EFX MkIII+ Audio Controller User Manual
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents