Table of Contents
Advertisement
3.3.1 Editing MIDI Program Change
①
Select the preset to be edited in the Preset Mode
②
Press/hold the MODE switch to enter the Edit Mode for 1 second if you are in the Preset
Mode. The PC1 will be automatically selected and the display will show:
③
Press the PS-2 switch(CH, channel) to set a
current PC1 channel.
④
Press/hold the BANK UP or BANK DOWN switches to select a channel from 1 through 16.
⑤
Press the PS-2 switch to store a new
switch will flash 2 times.
* The PCs channel is global (the same for all banks/presets). you need not edit this for any
other banks/presets if you have already done so. In this case, omit the procedure
⑥
Press the PS-3 switch(PC, program change) to set a
current PC1 number.
⑦
Press/hold the BANK UP or BANK DOWN switches to select a
128 or OFF.
⑧
Press the PS-3 switch to store a new
switch will flash 2 times.
⑨
Press the PS-1 switch(FS, function select) to set other
③ ⑧
~ .
Note
* The OFF means no Program Change is transmitted.
* The last decimal point on the display means that the display shows a PCs or CCs number.
* The Initial default channel setting are PC1 : 01, PC2 : 02, PC3 : 03, PC4 : 04 and PC5 : 05.
* The Initial default number settings of the PC1 and PC2 are OFF.
3.3.2 Editing MIDI Control Change
The MIDI Control Changes are transmitted via MIDI OUT jack when the assigned loops turn on or
off. The CC1 is assigned the Loop1, ..... , and the CC8 is assigned the Loop8. The Control
Change Value is 0 or 127 when the assigned loop turns off or on.
EFX MkII Audio Controller User Manual
PC1 channel number. The display will show a
PC1 channel in memory. The LED above the PS-2
PC1 number. The display will show a
PC1 number in memory. The LED above the PS-3
PCs and follow the same procedure
③ ⑤
~ .
PC1 number from 1 through
7
Hide quick links:
Advertisement
Table of Contents
