To Reset The Hot Desking Password; To Use Hot Desking To Divert An Ip Telephone Configuration; Resetting The Hot Desking Password - Nortel BCM50 Installation And Configuration Manual

5 Allow/disallow hot desking, as required by pressing
6 Press to exit.
QUIT

Resetting the Hot Desking password

The Hot Desking password can be reset from system programming. This allows users who forget
their passwords to re-enter hot desking and to reset their password.
Note: This process also cancels hot desking for the telephone, if the application is currently active.
Refer also to "Notes about Hot Desking" on page

To reset the Hot Desking password

1 You can access the reset button from two locations:
• Resources//Telephony Resources//Terminal Details tab
• Telephony//Sets//Active Sets//Capabilities and Preferences//IP Terminal Details
Then select an IP set from the list.
2 From the top list, select the IP telephone where you want to reset the password.
3 Click the Reset Hotdesking Password button.
4
Click OK on the dialog box to reset the password.
The password resets to Null. The user can enter hot desking again to enter a new password.

To use Hot Desking to divert an IP telephone configuration

You perform this procedure at the target telephone, where the diverted calls are to be answered.
1 Ensure both telephones are on-hook before attempting to active this feature.
2 Enter FEATURE *999.
3
Press
DIVERT
4 Enter the DN of the telephone you want to divert to this telephone.
Note: If the originating telephone does not allow hot desking, a Not
allowed
telephone is on a call when the diversion command is issued.
5
Enter the password of the diverted telephone.
The buttons on your telephone will mimic the buttons configured on the diverted set. The diverted
telephone indicates that it has been diverted, and it cannot be used until Hot Desking is cancelled.
prompt displays. This prompt also occurs if the originating
BCM50 IP Telephone Installation and Configuration Guide
Chapter 6 Global IP features
.
CHANGE
55.
57