To Assign The Services List To A Button; To Use The Services Button To Access Features; Ip Telephone Feature Display Labels - Nortel BCM50 Installation And Configuration Manual

To assign the services list to a button

The services list defaults to the Services button (
list to one of the other feature buttons.
The user can also assign it as a memory button at a telephone, using FEATURE *3.
If you move the feature to another memory button, the Services button no longer accesses the
menu.

To use the Services button to access features

1 Press Services
2 Use the up and down directional buttons on the telephone, or the Page + and Page -
display keys, to move through the list to find the feature you want.
3 Press the Select display key to activate the feature.
4 Use the feature as you would on any other telephone.
For example, if you selected Call Forward, enter the number you to which you want to forward the
call. Or, if you select speed dial (FEATURE 0), enter the speed dial code for the number you want
the telephone to dial.

IP telephone feature display labels

When your IP telephone acquires a DN record, the default settings are applied to the telephone,
including assigning features to the memory keys on the telephone. These features all have
predefined labels, and the telephone automatically displays the appropriate labels beside the
programmed buttons. This screen allows you to change the soft display label for features assigned
to the memory keys beside the displays for 20XX IP telephones.
This screen allows you to define custom labels for 24 features. The system comes with ten default
labels, which are feature and language-specific, depending on the system assigned country or
region or both profiles. The default labels are mainly messaging and call attendant features.
You can change any other feature label by adding to this list, or by deleting any of the default
settings and inserting new codes and labels.
Where: Element Manager, Telephony//Global Settings//IP Terminal Settings//Key Labels
or the button on which the list is assigned.
BCM50 IP Telephone Installation and Configuration Guide
Chapter 6 Global IP features
). However, you can assign the display
53