To Set Up A Password And Allow Hot Desking; Using The Hot Desking Feature - Nortel BCM50 Installation And Configuration Manual

56 Chapter 6 Global IP features
• If the target telephone has a headset, but the originating telephone does not, once hot desking
is activated the headset on the target telephone will no longer work. To correct this situation,
you need to cancel hot desking, plug a headset into the originating telephone, then re-establish
hot desking at the target telephone.
Originating telephone

Using the Hot Desking feature

Using hot desking requires that you set up a password and permission on the originating telephone
and activate hot desking from a target telephone.

To set up a password and allow Hot Desking

Set up the password on the originating telephone. This process also allows you to determine if you
want the telephone to be diverted.
1 Enter FEATURE *999.
2
Press
ADMIN
3
Enter a new password, or change an existing password, and press OK.
4 Confirm the password, and press
N0027269 01 N0027269 01
Target telephone
.
OK
.
Head set feature active on
target set after Hot Desking?
Yes
No
No