HighPoint RocketRAID 4500 Series User Manual page 12

Highlight the target disks using the arrow keys, then press the Enter key. A numeral will be displayed
before each selected disk. Once all target disks have been selected, press ESC key. The utility will display a
warning, and ask you to press Y (yes) to initialize, or N (no) to cancel. Once initialized, these disks can be
used to create RAID arrays. These disks will be displayed as "Initialized" (under Status).
Warning: Initialization will destroy all pre- existing data on the selected hard disks. Only initialize
disks that do not contain critical data.
12