SERVICE MANUAL
13
Actuator Assembly / Manual Seat Tilt
Descriptions:
1 Actuator
2 Screws
3 Bearing
Requirements:
· 2 x 4mm hex wrench
13.1
Inspection
· Check all screws are present and fitted tightly.
· Run the actuator (1) through the full extent of its travel (max and min) to ensure there are no
issues.
· Check there are no issues with the actuator cable, or cable connection.
· Check there is no damage to the actuator motor moulded housing.
24
4 Spacer
5 Collar and hand wheel
®
Invacare
- Spectra Blitz