Invacare Spectra Blitz Service Instructions Manual page 31

®
Invacare - Dragon Vertic
· Locate the other half of the Wheel Rim (3) in position, insert Socket Cap Screws (4) in position
and proceed to tighten the screws. Ensure the inner tube is not trapped between the Wheel Rim
halves.
· Tighten securely Socket Head Cap Screws (4) using a 5mm hex wrench.
· Inflate to the correct pressure as indicated on the Tyre Side Wall.
· Position Wheel on Wheel Hub, locate and tighten the four Wheel Bolts (6) using a 5mm Torque
hex wrench.
NOTE:
Torque rating of rear wheel bolt = 35 – 40Nm.
SERVICE MANUAL
31