Control Panel - Airrex HSC-36 User Manual

CONTROL PANEL FUNCTIONS
⑩
① Power : Use to power On / Off.
② : Raises or lowers temperature and/ or sleep (off) time.
③ Cool : Use to select cooling mode.
④ Off Timer : To set the length of time, once turned on, that you wish the
cooler to run for. You can set 0~24 hours. Time intervals are
30mins. up to 10 hours and then 1 hour between 10 and 24 hours.
⑤ Remote : From the long distance, you can control the machine by wired remote control.
⑥ Room : If the LED is On, the displayed temperature is for Room temp. If the LED
is Off, the displayed temperature is for spot temp.
⑦ Comp. : When the compressor is operating, the LED is On.
⑧ Error : Error signal ( E1 : High Pressure, E2 : Low Pressure, E3 : Sensor, AF: Eva Freezing)
⑨ Water Full: Red light indicates 'Tank Full'. The compressor will shut off
automatically. Empty tank and replace in position to resume operation.
⑩ Display : Display Room/Spot temperature, the setting temp and sleep time in case of
setting them. When the user set the sleep timer, 'hr' will be turned on.
(Display of 'LO' : under the 32℉, Display of 'HI' : over the 99℉)
6
⑤
⑥
⑦
③
②
⑧
⑨
④
①