Safety Instructions - Airrex HSC-36 User Manual

SAFETY INSTRUCTIONS

The following instructions are for ensuring the user's safety and to prevent any physical injury or
material damage. Please read carefully and follow all instructions.
There are two sections to these instructions: WARNING and CAUTION.
The following symbols are for your guidance:
= You must NOT.
WARNING
Use a 220V / 60Hz / 1 phase (HSC 36&60), 220V&480V / 60Hz / 3 phase (HSC 60/70)
power supply only.
(Wrong supply may cause a fire and / or shock hazard)
Do not use a damaged power cable.
(Short, fire or shock hazard)
Before cleaning, turn off circuit breaker.
(Otherwise risk of electric shock)
Do not place anything on top of the machine.
(This could cause electric shock, malfunction or injury)
Do not use an extension lead unless of the approved type.
(Risk of fire and / or electric shock)
Do not 'kink' or sharply bend the power cable nor put any weight on it.
(The insulation may be damaged causing fire and/ or electric shock)
Do not turn off by circuit breaker. Always turn off at control panel first.
(Risk of electric shock and / or malfunction)
Do not use this cooler on unstable or inclined surfaces. Always use on solid flat floor.
(Risk of falling causing injury, fire or malfunction)
= You MUST.
Keep this manual in a visible location near the cooler
for easy reference.
3