Control Panel Functions 8~9 - Airrex HSC-12L User Manual

CONTROL PANEL FUNCTIONS
※ HSC-12L
① Power : Use to power On / Off.
② ∨ ∧: Raises or lowers setting temperature and/ or sleep (off) time.
③ Mode : Use to select cooling mode or Dehumidifier mode or FAN mode.
④ Fan Speed : Controls fan low/high speed.
⑤ Off Timer : To set the length of operating time, once turned on, that you wish the
cooler to run for. You can set 0~24 hours. Time intervals are
30mins. up to 10 hours and then 1 hour between 10 and 24 hours.
⑥ Room : If the LED is On, the displayed temperature is for Room temp.
If the LED is Off, the displayed temperature is for spot temp.
⑦ Comp. : When the compressor is operating, the LED is On.
⑧ Error : Error signal
( E2 : Low Pressure, E3 : Sensor, E5 : BLDC Motor, AF: Eva Freezing)
⑨ Check : If Water full or Align Drain Tank is checking. The LED is on.
⑩ Display : Display Room/Spot temperature, the setting temp and off time
in case of setting them.
(Display of 'LO' : under the 32℉, Display of 'HI' : over the 99℉)
⑪ ℃,℉ : When the user change temperature unit ℃↔℉, ℃ or ℉ will be turn on.
⑫ hr : When the user set the off timer, 'hr' will be turned on.
8
⑨
⑩
③
④
②
⑪
⑧
⑨
⑧
⑫
⑥
⑦
⑤
①
rev0