Operating Instructions; Running & Stop; Selection Of Area/Room Or Spot Cooling - Airrex HSC-36 User Manual

OPERATION
RUNNING & STOP
1. START BY PRESSING THE 'POWER' BUTTON.
·Cooler will start up automatically.
·To STOP the unit, press the 'POWER' button once again.
2. If you wish to operate on fan only, press the 'COOL' button. To resume cooling,
press the 'COOL' button again.
(Note : There is a 3 minute delay when switching functions to protect the compressor)

SELECTION of AREA/ROOM or SPOT COOLING

To reduce the temperature of the entire room select 'Area/Room'.
For 'targeted' cooling of machinery, servers, or people etc. select 'Spot Cooling'.
1. If you want to display room temperature,
push cool and button simultaneously
during three seconds.
2. If you want to change temperature unit
℉ ↔ ℃, push ▼ and ▲ button simultaneously
during three seconds.
7