Safety Instructions - Airrex HSC-14 User Manual

SAFETY INSTRUCTIONS

The following instructions are for ensuring the user' s safety and to prevent any physical
injury or material damage. Please read carefully and follow all instructions.
There are two sections to these instructions: WARNING and CAUTION.
The following symbols are for your guidance:
= You must NOT.
WARNING
Use a 115V. 60Hz.(HSC-14/18/24), 220V. 60Hz(HSC-24A) 1 Phase power supply only.
(Wrong supply may cause a fire and / or shock hazard)
Securely plug into an grounded outlet.
(Unless earthed, may cause electric shock)
Do not use a damaged power cable, plug or socket.
(Short, fire or shock hazard)
Do not remove plug by pulling cable or with wet hands.
(Risk of fire and electric shock)
Before cleaning, remove plug from socket.
(Otherwise risk of electric shock)
Do not place anything on top of the machine.
(This could cause electric shock, malfunction or injury)
Do not use an extension cord.
(Risk of fire and / or electric shock)
Ensure mains plug is clean and securely plugged in.
(Otherwise it may short causing smoke and fire)
Do not 'kink'or sharply bend the power cable nor put any weight on it.
(The insulation may be damaged causing fire and/ or electric shock)
Do not turn off by removing power plug. Always turn off at control panel first.
(Risk of electric shock and / or malfunction)
Do not use this cooler on unstable or inclined surfaces. Always use on solid
flat floor. (Risk of falling causing injury, fire or malfunction)
A damaged power supply cable must be replaced with a new power supply
cord obtained from the product manufacturer and not repaired.
Keep this manual in a visible location near the cooler for easy reference.
= You MUST.
3