Why Are The Voice Announcements Omitted - Visonic PowerMax User Manual

A . Controlling a gate or another electrical device:
Pressing the AUX button will open/close an electrically-
controlled gate, or will control a chosen electrical
device within or around your business or residence.
B . Arming the system in the INSTANT mode (without an
entry delay): Pressing the AUX button immediately after
arming, while the exit delay is in progress, will cause
the system to be armed without an entry delay. This
means that entering the protected premises via any
zone will trigger an immediate alarm. You and other
holders of keyfob transmitters will have no problem,
because you can disarm the system before entering by
pressing the DISARM (
before entry.
C . Getting status information: Upon pressing the AUX
button on your transmitter, the voice module will
6
) button on your transmitter
Figure 4. Controls and Indicators
announce the status of the system over the built-in
loudspeaker.
1.7 Why are the Voice Announce-
ments Omitted in this Manual?
The PowerMax's voice module helps you control the
system at close range and also from a remote telephone.
The pre-recorded voice responds to your commands by
announcing what the system is doing and by prompting
you to perform certain actions. It also announces alarms
and troubles, and identifies the source of each.
The pre-recorded plain language announcements made by
the voice module are quite clear and self explanatory. We
therefore omitted the spoken text in the following sections
of this guide and focused attention on visual display and
sounder beeps. This way we managed to keep the user
guidance brief and concise.
DE5450U