Operating Your Transmitter
Installing the Battery:
Install 12V MN21/A23 battery (not included), to
prevent damage to transmitter, remove the battery
if not used for long periods.
Restore power to the ceiling fan and test for
proper operation.
1.
"HI, MED, LOW" buttons:
These three buttons are used to set the fan
speed as follows:
LOW=Low speed,
MED= Medium speed
HI=High speed
2.
"OFF" button: This button turns the fan off.
3.
The "
" button turns the light ON or OFF and
also controls the brightness setting. Press and
release the button to turn the light ON or OFF.
Press and hold the button to set the desired
brightness. The light key has an auto-resume, it
will stay at the same brightness as the last time
it was turned off.
4.
The "
" button is used to set the fan forward
or reverse, press the button forward (for warm
weather) or reverse (for cool weather).
Figure 16
Figure 17
9 9