WARNING! During use and for some time
after the silencer is very hot. Do not touch the
silencer if it is hot!
The silencer is designed to
give the lowest possible noise
level and to direct the engine's
exhaust fumes away from the
user. The engine's exhaust
fumes are hot and can contain
sparks, which can lead to the
outbreak of fire.
In countries that have a warm
and dry climate the risk of
forest fires is obvious. We
have therefore fitted certain
silencers with a spark arrest
screen. Make sure that your
silencer is fitted with this kind
MPORTANT INFORMATION! It is extremely important that
the instructions for checking, maintaining and servicing
the silencer are followed. (see the section "Control,
maintenance and service of the power cutter's safety
4 Disc guard for the cutting disc
WARNING! Always check that the disc guard
is correctly fitted before starting the machine.
The disc guard is mounted
above the cutting disc and
prevents cutting fragments
from being thrown towards the
Control, maintenance and service of
the machine's safety equipment
WARNING! All service and repairs to the
power cutter require special training. This
applies especially to the power cutter's safety
equipment. If the power cutter does not meet
any of the controls listed below you should
contact your service workshop.
The purchase of one of our products
guarantees that professional repair and
servicing will be carried out on it. If the point
of purchase is not one of our servicing
dealers, please ask for details of the closest
1 Anti-vibration system
Check the anti-vibration
elements regularly for material
cracks and deformation.
Check that the anti-vibration
elements are securely
mounted between the engine
unit and the handle system.
2 Stop switch
Start the engine and make
sure that the engine stops
when the stop switch is
moved to the stop position.