Machine´s Safety Equipment; General - Husqvarna K 6500 II Ring Operator's Manual

General

WARNING! Never use a machine that has
!
faulty safety equipment! If your machine
fails any checks contact your service
agent to get it repaired.
To prevent accidental starting, the steps
described in this chapter must be
performed with the motor off and the
power cable removed from the socket, if
not otherwise stated.
This section describes the machine´s safety equipment,
its purpose, and how checks and maintenance should be
carried out to ensure that it operates correctly.
Throttle lockout and ON/OFF valve for the
water
The throttle lockout is designed to prevent accidental
activation of the throttle and regulate the water on/off
valve.
When you press the lock (1) into the handle (i.e. when you
grasp the handle) it opens the water valve and releases
the throttle control (2).
1
2
When the grip on the handle is released, both the throttle
and throttle lockout return to their original positions. In this
position, the machine will stop and the throttle will be
locked, while the water valve returns to closed position.
Chec king the throttle lockout
• Make sure the power trigger is locked when the power
trigger lock is in its original position.
6 – English
MACHINE´S SAFETY EQUIPMENT
• Press the throttle lockout and make sure it returns to
its original position when you release it.
• Check that the power trigger and the power trigger
lockout move freely and that the return spring works
properly.
Blade guard
WARNING! Always check that the blade
!
guard is fitted correctly before starting
the machine.
This guard is fitted above the blade and is designed to
prevent parts of the blade or cutting fragments from being
thrown towards the user.
Chec king the blade and the blade guard
• Check that the guard over and under the cutting blade
is not cracked or damaged in any other way. Replace
when damaged.
• Check that the cutting blade is fitted correctly and
does not show signs of damage. A damaged cutting
blade can cause personal injury.
Spray guard
The spray guard provides protection against ejected
debris, thrown water and concrete slurry.