SOLTEK SL-75DRV-X User Manual page 84

Table of Contents

Advertisement

75DRV/75DRV-X
PNP OS Installed Select Yes if the system operating environment is
NOTE:
BIOS will automatically disable all PnP resources except the boot
device card when you select Yes on Non-PnP operating system.
Reset Configuration
Resource Controlled
PCI/VGA Palette Snoop This option allows the BIOS to preview VGA status,
Assign IRQ for VGA Select Enabled if you system has a VGA controller
Assign IRQ for USB Select Enabled if you system has a USB controller
Plug-and-Play aware (e.g., Windows95).
Normally, you leave this Disabled. Select Enabled
Data
to reset Extended System Configuration Data
(ESCD), when you exit Setup if you have installed
a new add-on and the system reconfiguration has
caused such a serious conflict that the operating
system cannot boot.
The Plug and Play AwardBIOS can automatically
By
configure all the boot and Plug and Play-compat-
ible devices. If you select Auto, all the interrupt re-
quest (IRQ) and DMA assignment fields disappear,
as the BIOS automatically assigns them.
and to modify the information delivered form the fea-
ture Connector of the VGA card to MPEG card. This
option can solve the display inversion to black after
you have used MPEG card.
and you have one or more VGA devices connected.
If you are not using your system's VGA controller,
select Disabled to free the IRQ resource.
and you have one or more USB devices connected.
If you are not using your system's USB controller,
select Disabled to free the IRQ resource.
84

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-75drv

Table of Contents