Table of Contents
Advertisement
5.7.10. Reset
It is important to distinguish between reset and reboot the router.
Action
Reboot
Turn off and then turn on router
Restore default configuration
Reset
and to reboot the router.
Table 12: Description of reset and restart router
After green LED starts to blink it is possible to restore initial settings of the router
by pressing button RST on front panel. After press button RST it is restoration of default
configuration and reboot (green LED will be on).
For pressing the RST button could be used a narrow screwdriver.
We recommend to backup your router configuration (see Configuration manual),
because after reset router set configuration to the initial state.
19
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Router behavior
Fig. 35: Router reset
ROUTER DESCRIPTION
Invoking events
Disconnect and connect the power.
Press the reboot button in the web configuration.
Press RST button.
Advertisement
Table of Contents
Need help?
Do you have a question about the UR5 v2 SL and is the answer not in the manual?
Questions and answers