Router Reset; Description Of Reset And Restart Router - Lucom UCR11 v2 User Manual

5.8.10 Reset
It is important to distinguish between reset and reboot the router.
Action Router behavior
Reboot Turn off and then turn on router
Reset Restore default configuration and reboot
the router
After green LED starts to blink it is possible to restore initial settings of the router by press-
ing button RST on front panel. After press button RST it is restoration of default configuration
and reboot (green LED will be on).
For pressing the RST button could be used a narrow screwdriver.
We recommend to backup your router configuration (see Configuration manual), because
after reset router set configuration to the initial state.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
Table 11: Description of reset and restart router
Figure 28: Router reset
22
5. ROUTER DESIGN
Invoking events
Disconnect and connect the power,
Press the Reboot button in the web
configuration
Press RST button