Chain Dialing - Uniden DSS7815 Owner's Manual

4) Press OK soft key to store the name;
appears.
No.
5) Use the number keypad,
phone number (up to 20 digits). If you make an error,
use the DELETE soft key to erase the incorrect digits.
When you are finished, press the
the number.
6) appears. Press
Distinctive Ring
/vol to move the pointer to one of the
Distinctive Ring options and then press the
7) appears. Press
Speed Dial
To move the pointer to select the
(10 locations: SPD1-SPD0).
location
8) Press the OK soft key. You will hear a confirmation
tone, and appears in the display.
Done!

Chain Dialing

The memory locations in the handset are not limited to phone numbers. You can
also store a group of numbers (up to 20 digits) that you need to enter once your call
connects. This is referred to as Chain Dialing. An example of this is a bank account number.
Store the account number in one of the phonebook locations (refer to "Phonebook (Storing
Phone Numbers, Names, Distinctive Rings and Speed Dial)" on page 35). When you call
your bank and are prompted to enter the
account number, scroll through your phonebook locations until you find your account
number, and then press the
Store/Edit
/tone/ or #/ to enter the
OK soft key to store
/vol/ or
OK soft key.
/vol/ or /vol
Speed dial
DIAL soft key.
Store/Edit No.
8009675543
DELETE PAUSE
Distinctive Ring
No Selectn
Flicker
BACK
Speed Dial
No Selectn
SPD1:<Empty>
BACK
Movies
8007303456
Beethoven9/SPD1
BACK DELETE
[36]
OK
If you choose not
!
to store a
Distinctive Ring,
simply select the
"No selection"
option.
If you choose not
!
OK
to store the
name/number as a
speed dial simply
choose the "No
selection" option.
OK
EDIT