Table of Contents
Advertisement
Symptom
Severe noise interference.
The Caller ID does not
display.
You cannot register the
handset
at the base.
The handset doesn't
communicate with other
Handsets.
An extra handset can't join
the conversation.
Unable to Pulse Dial.
Suggestion
•
Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.
•
Move to another location or turn off the source of interference.
•
The handset was picked up before the second ring.
•
The call was placed through a switchboard.
•
Call your local telephone company to verify your Caller ID service is current. There
may be a problem with your Caller ID service.
•
Charge the battery pack for 15- 20 hours.
•
De- register the handset (see "De- register the Handset" on page 26) and register
the handset (see "Register the Handset" on page 15).
•
Make sure that you have registered all handsets.
•
De- register the handset (see "De- register the Handset" on page 26) and register
the handset (see "Register the Handset" on page 15).
•
Make sure there are not two handsets already using the conference feature.
•
Make sure that another handset or base is not in privacy mode.
•
Make sure that another handset is not in privacy mode.
•
Pulse Dialing is only used on older telephone exchanges, this model uses Tone
Dialing which is used by all modern telephone exchanges.
[58]
Hide quick links:
Advertisement
Table of Contents
