Using One Touch Voice Mail Access - Uniden DSS7815 Owner's Manual

Using One Touch Voice Mail Access

If you subscribe to voice mail service, you can use your phone to access your voice
mailbox. The new message LED flashes whenever you have messages waiting in your
voice mailbox. Just program the handset with your access number,
and you can get your messages at the touch of a button on the handset. (The voice mail
service provider will supply you with the access number. This number may be simply a
phone number. Refer to the provider's literature.)
To program or delete your Voice Mail Access Number, See page 19.
Dialing your Voice Mail Service
Once you've programmed your personal access number, you can dial your mailbox
with the touch of a button. When you have messages, simply press the
have not entered the access number or it has been deleted, when you press
the soft key,
No Number Stored To store number press [MENU]
will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
The LED flashes when you have new messages in the voice mail service. If the LED
remains on after you've retrieved your messages, you may need to reset the
indicators. With the phone is in standby mode, press and hold find handset on the
base until the paging sound stops (about 5 seconds).
soft key. If you
appears and you
[34]
You must
!
subscribe to voice
mail service from
your telephone
company in order
to use this feature.
The voice mail
service company
will provide you
with the access
number.
For New Zealand:
!
The Telecom Voice
Mail Access
Number is pre-
programmed into
speed dial location
4.