Support Bel/Can In Ack/Nak; Rs232 Defaults; Ncr Modifiers; Ncr Ack/Nak - Honeywell Voyager 1250g User Manual

Support BEL/CAN in ACK/NAK

This protocol responds to <BEL> and <CAN> commands when in ACK/
NAK mode. The scanner sounds an error tone when a <BEL> command is
sent from the host. <CAN> terminates the transmission. Default = BEL/
CAN Off.
BEL/CAN On
* BEL/CAN Off

RS232 Defaults

If you want the custom RS232 default settings restored to your scanner,
scan the RS232 Defaults bar code below. This resets the scanner to the
custom default settings (see Setting Custom Defaults on page 1-5). If
there are no custom defaults, it will reset the scanner to the factory default
settings. Any settings that have not been specified through the custom
defaults will be restored to the factory default settings.
RS232 Defaults

NCR Modifiers

NCR ACK/NAK

This is an NCR communication protocol for ACK/NAK processing. Default
= NCR ACK/NAK Off.
* NCR ACK/NAK Off
NCR ACK/NAK On
2 - 31