Honeywell Voyager 1250g User Manual page 125

Concatenation Timeout
When searching for bar codes during concatenation, you may wish to set a
delay used to find the next bar code. Set the length (in milliseconds) for this
delay by scanning the bar code below, then setting the timeout (from 1-
65535 milliseconds) by scanning digits from the
scanning Save. Default = 750.
ISBT 128 Predefined Concatenation Sequences
Note: You must enable Code 128 and ISBT 128 to use this feature.
The following bar codes are used to select the pre-defined ISBT 128 Con-
catenation Sequence you wish to use. Once you have selected the concat-
enation sequence, use
On/Off to enable this feature. Default = Donation ID Number (001)
and ABO/RhD Blood Groups (002).
* Donation ID Number (001)
and ABO/RhD Blood Groups (002)
Donation ID Number (001) and
Confidential Unit Exclusion
Status
Product Code (003) and
Expiration Date (Form 2)
Product Code (003) and
Expiration Date (Form 4)
Concatenation Timeout
ISBT 128 Predefined Concatenation Sequences
Programming
Donation ID Number (001) and
Donor ID Number (019)
Product Code (003) and
Expiration Date (Form 1)
Product Code (003) and
Expiration Date (Form 3)
Chart, then
6 - 25