Resetting The Factory Defaults - Honeywell Voyager 1250g User Manual

Resetting the Factory Defaults

This selection erases all your settings and resets the scanner to the
original factory defaults.
If you aren't sure what programming options are in your scanner, or you've
changed some options and want to restore the scanner to factory default set-
tings, first scan the Remove Custom Defaults bar code, then scan Activate
Defaults. This resets the scanner to the factory default settings.
Remove Custom Defaults
The Serial Programming Commands,
default settings for each of the commands (indicated by an asterisk (*) on the
programming pages).
8 - 4
beginning on page 9-1 list the factory
Activate Defaults