Pushbuttons - Leds And Display - Electrolux TC2 Service Manual

Pressing button P2 sequentially, it is possible to choose one of the three levels and the lighting up of the
corresponding LED confirms the selection.
The different washing options like: Prewash, Economy, etc. are set obligatory as programme.
3.2.6 Pushbuttons – LEDs and Display
The functions of each button are defined by the configuration of the appliance.
•
Button no. 1: this button is related to LEDs (L1÷L5); pressing it
sequentially the spin speed varies from max., to no spin or rinse hold.
•
Button no. 2: this button is configurable and is related to LEDs
(L6÷L8). (In some appliances it is connected to "Time driver").
•
Button no. 3: this button is configurable and is related to LED (L14); it
performs the super rinse function.
•
Button no. 4: this button is configurable and has the function of
START/PAUSE (inside it there are two LEDs, one red that flashes in
case of alarm and one green that flashes when the appliance is in
pause or in connection with the red one to indicate the alarm code).
•
Button no. 5: this button is configurable and has the function of
DELAYED START. During the programme selection phase is possible
to select a delayed start from 30' to 20 hours (30'
2h 3h... 20h
the last hour, the time decreases minute by minute.
SOI/DT 2007-06 dmm
L8 Daily
L7 Light
L6 Super quick
0h) and the time is shown by the display. During
60' 90'
9/75
599 38 94-46