Tc2; General Characteristics - Electrolux TC2 Service Manual

5 TC2

5.1

GENERAL CHARACTERISTICS

The ENV060 electronic control system consists of a
single PCB, which incorporates the power, control
and display (where the LCD display is connected)
functions and the programme selector is
incorporated in the board.
The PCB is mounted on a casing fitted to the control
panel.
Version
TC2 (TIME MANAGER)
Version
TC2 (PROPORTIONAL)
Number of buttons
Number of LEDs
Programme selector
Serial port
Power supply
Type of washing
Rinsing system
Motor
Spin speed
Anti-unbalancing system
Water fill
Detergent drawer
Control of water level in the
tub
Door safety device
Power of heating element
Temperature control
Buzzer
Sensors
SOI/DT 2007-06 dmm
Max. 8 (5 options + 1 start/pause + 2 for time driven)
Max. 2 + LCD display
15-21 positions with main switch (incorporated in the PCB )
DAAS-EAP communications protocol up to 115.200 baud
220/240V
50/60 Hz (configurable)
Traditional with "eco-ball" sphere
Jet-system
Traditional with "eco-ball" sphere
Jet-system
Collector, with tachometric generator (Universal)
Two-pole asynchronous, with three-phase tachometric generator (with
Inverter)
600 ÷ 1600 rpm
FUCS
1 solenoid valve with 1 inlet – 2/3 outlets
3 compartments: prewash/stains, wash, conditioners
4 compartments: prewash/stains, wash, conditioners, bleach
Electronic/analogue pressure switch
Traditional (with PTC)
Instantaneous
1950W with thermal fuse incorporated
NTC sensor incorporated in the heater
Traditional incorporated in the electronic board
Water fill gauge (flowmeter)
Aqua control
22/75
599 38 94-46