Electrolux TC2 Service Manual page 74

h. Remove the screw which secures the PCB (which controls the WD
section) to the bracket, extract it and position it so as it does not
interfere with the disassembling of the control panel.
g. Remove the 2 screws which secure the control panel to the cross-
member.
h. Release the 2 hooks (one on the right, the other on the left) which
secure the control panel to the cabinet.
i. Release the hook which secures the cross-member to the conveyor.
j. Extract the cross-member from the control panel, lift and turn the
control panel.
k. Cut the two clamps which lock the wiring of the door microswitch.
SOI/DT 2007-06 dmm 74/75 599 38 94-46