Electrolux TC2 Service Manual page 72

a. Place it as shown in figure.
b. Remove the screws and release the hooks which secure the board
casing to the control panel.
c. Before mounting the new board extract the knob pressing the
hooks indicated by the arrows as represented in figure.
While re-assembling repeat the same operations in reverse order
and pay attention to position correctly the knob.
While remounting the work top please pay attention not to position it
as in fig. A but as in fig. B.
SOI/DT 2007-06 dmm
A
B
72/75 599 38 94-46