Electrolux TC2 Service Manual page 31

- Reading/Cancellation of the last
10
----- ----
alarm
(*) In most cases, this time is sufficient to check the heating. However, the time can be increased by repeating the phase
without draining the water: pass for a moment to a different phase of the diagnostics cycle and then back to the heating control
phase (if the temperature is higher than 80°C, heating does not take place).
(**) The check at the maximum speed occurs without control of the FUCS and no clothes have to be inserted inside the
appliance.
31/75
SOI/DT 2007-06 dmm 599 38 94-46