Table of Contents
Advertisement
The R-Tech Plasma 100HF is a member of our field acclaimed family of welding products.
Premium features include:-
1. Inverter power source – more efficient to operate, provides smoother weld
characteristics.
2. Infinite cutting power adjustment, allows fine tuning of cut characteristics
3. HF Pilot start – Enables easy arc start even on painted surfaces
4. HF pilot arc restart – ideal for cutting mesh etc
5. Digital amp meters
6. Quick fitting torch for easy torch fitment/replacement
7. Long life – Low cost torch consumables
8. 60% Duty cycle at 40 Amps @ 40
Recommended Processes
The R-Tech Plasma 100HF is recommended for the plasma cutting processes within its output
capacity of 100 Amps DC
Equipment Limitations
The R-Tech Plasma 100HF is protected from overloads beyond the output ratings and duty cycle
as per machine specifications with thermostat protection of the output coils and rectifiers.
Cutting Capability – Duty Cycle
The R-Tech Plasma 100HF is rated at 100 Amps at 60% duty cycle on a ten minute basis. If the
duty cycle is exceeded a thermal protector will shut machine off until the machine cools.
MODEL
Power Voltage
Input Current
Rated Output Current
Current Adjusting Range
No-load Voltage
Rated Duty Cycle
Working Mode
Air Pressure
Max. Cutting Thickness (Clean cut mild steel)
Max. Cutting Thickness (Severance cut mild steel)
After Flow Time
Dimensions / Weight
4
Introduction
º
C
Technical Specifications
PLASMA 100HF
415V 3-Phase 50/60Hz
22 Amps
100 Amps
20-100 Amps
200V
60%
HF Start
55 PSI
26 mm
35 mm
10 Seconds
620x305x580 mm / 43KG
Advertisement
Table of Contents
