The Dsl Link Led Continues To Blink But Does Not Go Solid; The Dsl Link Led Is Always Off - CTC Union ATU-R140 User Manual

memory, the gateway should be functional and the LEDs should light
correctly.
5.4 The DSL Link LED continues to blink but does not go
solid.
1. This means that the DSL line is trying to train but for some reason it cannot establish
a valid connection. The main cause of this is that you are too far away from the
central office. Contact your DSL service provider for further assistance.
5.5

The DSL Link LED is always off.

1. Make sure you have DSL service. You should get some kind of information from your
ISP which states that DSL service is installed. You can usually tell if the service is
installed by listening to the phone line; you will hear some high-pitched noise. If you
do not hear high-pitched noise, contact your ISP.
2.
Verify that the phone line is connected directly to the wall and to the line input on the
gateway. If the phone line is connected to the phone side of the gateway or you have
a splitter installed on the phone line, the DSL light will not come on.
ATU-R140 ADSL Ethernet USB Router User's Guide
42