Port Forwarding - CTC Union ATU-R140 User Manual

Adsl2+ soho modem
Table of Contents

Advertisement

ATU-R140 ADSL Ethernet USB Router User's Guide
Figure 17 (IP QoS Traffic Rule)
The apply button will temporarily save this connection. To make the change permanent you
need to click on Tools (at the top of the page) and select System Commands. At the system
commands page, click on Save All.

4.6.5 Port Forwarding

Using the Port Forwarding page, you can provide local services (for example web hosting) for
people on the Internet or play Internet games. When users send this type of request to your
network via the Internet, the Gateway will forward those requests to the appropriate PC. Port
forwarding can be used with DHCP assigned addresses but remember that a DHCP address
is dynamic (not static). For example, if you were configuring a netmeeting server, you would
want to assign this server a static IP address so that the IP address is not reassigned. Also
remember that if an Internet user is trying to access an Internet application, they must use the
WAN IP address. The port forwarding will translate the WAN IP address into a LAN IP
address.
To configure a service, game, or other application select the external connection (for example
the Internet connection), from the Home screen, click Advanced and under Advanced, select
Port Forwarding. Next select the computer hosting the service and add the corresponding
firewall rule. If you want to add a custom application, select the User category, click New and
fill in the port, protocols and description for your application.
For example, if you want to host a Netmeeting session, from the Home screen, click
Advanced and under Advanced, select Port Forwarding. First select the IP address for your
Netmeeting server. Next select the Audio/Video category and add Netmeeting to the applied
rules box. To view the management rules, highlight Netmeeting and select view; this will
display the pre configured protocols and ports that Netmeeting will use. Now assuming that
your WAN connection is correct, you can run Netmeeting from your server and call users that
are on the Internet. If you know your WAN IP address, users can call you. Figure 18 illustrates
a typical Port Forwarding configuration.
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents