Vacuum Will Not Start - Cyclo Vac GS71 Owner's Manual

TROUBLESHOOTING
PROBLEM

Vacuum will not start

If none of these suggestions help start your vacuum unit,
16
POSSIBLE CAUSE
The electrical power is not
connected properly
Low voltage wire not
connected properly
Faulty vacuum inlet
Unit circuit breaker
is off
In-house circuit breaker
is off
Defective on/off hose
contact your authorized service center.
Troubleshooting
CORRECTIVE ACTION
Ensure that the power
cord is plugged into a
grounded electrical outlet,
according to specifications
on page 7.
Verify the low voltage
wires, make sure they are
properly inserted into the
low voltage inlet, as per
instructions on page 8.
Start the vacuum unit
from other inlets in your
home, to identify the
defective inlet.
Press the reset button
to reset the unit circuit
breaker. If unit restarts
and automatically shuts
off shortly after, contact
an authorized service
center.
Reset the circuit breaker
in your electrical panel.
Verify that your central
vacuum unit is connected
on a dedicated grounded
circuit (see pages 6
and 7).
Turn the hose 1/4 of
turn in the vacuum inlet.
If unit starts, have the
vacuum hose checked by
a certified service center.