To Replace Led Light - Aquatic ESTATE AIR-WHIRLPOOL Owner's Manual & Installation Manual

TO REPLACE LED LIGHT

1. Disconnect the power to your bathtub.
2. Drain the bathtub.
3. Open the lens of the fixture using ONLY the proper tool provided
for that purpose (see Figure 9). Do not attempt to remove the lens
without the provided tool.
4. Replace your LED light (replacement LED lights can be obtained from
Aquatic).
NOTE: Do not twist LED light into socket. Use gentle pressure and push LED light into place.
18
Estate Air-Whirlpool Owner's Manual & Installation Guide
OPERATION
Lens Tool
Figure 9
LED Bulb
Aquatic