Repair; Jet Cleaning; Surface Scratch Removal - Aquatic ESTATE AIR-WHIRLPOOL Owner's Manual & Installation Manual

Jet Cleaning

All Estate Series jets are removable, and can simply be put into the dishwasher for easy cleaning. See JET OPERATION
for removal, page 17. (NOTE: Use top rack of dishwasher and remove before the drying cycle starts.)

Surface Scratch Removal

Minor scratches may be removed by polishing your tub with a non-abrasive car polish, followed by buffing. Deeper
scratches can be removed by:
• Sanding with wet 400 grit sandpaper.
• Sanding with wet 600 grit sandpaper.
• Sanding with wet micro-grit sandpaper.
• Buff out using car polish.

REPAIR

The installation and service of your whirlpool bath should be performed only by a qualified service technician. Remember
when contacting your dealer always have your serial number, proof of purchase and model number available. This will
ensure a quick response on warranty items.
The model and serial numbers are located above the pump on the backside of the whirlpool.
NOTE: ALL WARRANTY REPAIRS MUST BE AUTHORIZED BY AQUATIC BEFORE WORK IS STARTED.
FOR SERVICE, ALWAYS CONTACT YOUR DEALER.
CAUTION: Care should be taken to prevent inappropriate chemicals coming in contact with the Lucite® acrylic surface.
Please read and observe all instructions and/or warnings on containers containing substances you contemplate applying
to your whirlpool. Any failure to comply may void your warranty.
20
Estate Air-Whirlpool Owner's Manual & Installation Guide
TUB CARE
Aquatic