To Replace Led Light - Aquatic LUXEAIR SERIES Owner's Manual & Installation Manual

TO REPLACE LED LIGHT:

1. Disconnect the power to your bathtub.
2. Drain the bathtub.
3. Open the lens of the fixture using ONLY the proper tool provided
for that purpose. Do not attempt to remove the lens
without the provided tool.
4. Replace your LED light (replacement LED lights can be obtained from
Aquatic).
5. Verify "O" ring is not damaged and is properly positioned in the
groove when replacing the lens. If there is damage or lens does
not seal properly, do not refill bathtub.
NOTE: Do not twist LED light into socket. Use gentle pressure and push LED light into place.
20
OPERATION
LuxeAir Series Owner's Manual & Installation Guide
Lens Install &
Removal Tools
Lens &
Wall Fitting
Aquatic