Jet Operations - Aquatic ESTATE AIR-WHIRLPOOL Owner's Manual & Installation Manual

Estate Air-Whirlpool Owner's Manual & Installation Guide
NOTE: DO NOT START PUMP UNTIL ALL JETS ARE SUBMERGED. WATER LEVEL SHOULD BE 2" ABOVE HIGHEST JET.

JET OPERATIONS

All Estate Series jets are removable, and can simply be put into the dishwasher for easy cleaning. (Note: use top rack
and remove before drying cycle.)
Estate Series Whirlpool Jets
The Estate Series combines Full-Size Pressure-Flo Hydrotherapy Jets, Aquatic Rotary Massage Jets and StressEaz Neck and
Shoulder Massage Jets (most models) to provide an invigorating hydrotherapy experience.
Full Size Pressure-Flo Hydrotherapy Jet:
Designed to facilitate targeted, deep tissue massage therapy. Each Full Size Pressure-Flo Hydrotherapy jet is fully
adjustable for direction of water flow and intensity of pressure.
StressEaz Neck and Shoulder Massage Jet:
Aquatic StressEaz Jets feature two side-by-side oval ports through which water moves simultaneously in opposite directions
to create a constant circular motion. This unique design effectively creates a consistent, even massage for the user's neck
and shoulder areas.
• To adjust pressure:
1. Grasp the outer ring of the jet.
2. Turn the outer ring clockwise to increase flow, counter-clockwise to reduce flow.
• To remove jet (see Figure 8):
1. Grasp the outer ring of the jet.
2. Turn the jet counter-clockwise, until the jet clicks, then pull.
• To replace jet (see Figure 8):
1. Insert the jet into jet housing.
2. Turn the jet clockwise, past point of resistance, until the jet clicks.
Note: Rotational swirl jet added for targeted lower back massage.
Aquatic
OPERATION
Figure 8
17